Moldman™ 8000 Product Specification Sheet


Dimensions & Weight	English	Metric
Height	64.0"	1625 mm
Width	41.0"	1040 mm
Depth	29"	740 mm
Weight	950 lb.	430 kg

Power & Air Requirements
Voltage	AC 208-230V, Single Phase, 50/60Hz
Power	4000W
Air Pressure	115-145 psi	8-10 bar
Air Volume	4 SCFM	120 lpm

Standard Features
Clamp	Pneumatic
Clamping Force	1 ton	10 kn
Clamp Stroke	6"	150 mm
Ejector	Pneumatic
Ejector Force	345 lbf.	1535 N
Ejector Stroke	0.4"	10 mm
Moldset Dimension	8" x 6"	200 mm x 150 mm
Mold Thickness	1.890" each half	48 mm each half
Injection Nozzle	Permanent engagement
Moldset Cooling	Cross-drilled mold platens
Melt Reservoir	22 lb. self draining	10 liter (10 kg) self draining
Melt Temperature	Up to 475¡ F	Up to 245¡ C
Gear Pump Capacity	70 bl. Hour	32 kg/hour
Pump Motor	1/4 HP	0.20 kW / 200 W
Injection Pressure	15 to 450 psi	1 to 30 bar
Shot Size	0.02 to 3 ounces, typically	0.5 to 100 grams, typically
Molding Cycle	PLC controlled: Standard or advanced injection profiles
Operator Display	Touch screen interface with all molding parameters and cycle counter.
	Customizable alarm screens. Imperial or metric units.
Safety Features	Two-hand-no-tie-down actuation with zero-force buttons.
	Key lock for set-up or production mode.
	Work table designed for easy mounting of custom fixtures.
	Low initial clamping pressure.
	Misplaced / foreign object sensing in clamping cycle.
	Emergency stop palm button.
Moldmanª 8000 Options
Castor Kit [adds 5"/127mm to height]	Kit includes, four castors, mounting hardware
Double Clamping Cylinder	Increases the clamping force to 1.5 Ton minimum
Moldset Cooling Kit	Kit includes, Polysicence chiller, hoses and fittings